Pixel-exact content for LED walls

An LED wall shows one exact rectangle of your player’s picture. Tell Studio where that rectangle is, and easyCMS draws your designs into it pixel for pixel: no scaling, no blur, nothing cut off.

  • Any sending card with an HDMI input
  • Set in Studio, in pixels
  • One licence per wall
1920 × 1080 HDMI output
768 × 384 LED wall
To scale: the wall’s area at the top-left of the player’s picture, black around it.
The short version

Your design, on the wall’s own pixels

  • The problem

    A sending card reads only part of the player’s HDMI picture. A design drawn for the whole picture arrives cut off, or scaled and soft.

  • The fix

    In Studio, give the screen the wall’s exact size and position. The player draws your designs there, one pixel on one LED, and keeps the rest black.

  • What you need

    An easyCMS player (the Web Player today; Android player 1.0.8 and the Mac player are coming), a sending card with an HDMI input, and the wall’s size in pixels.

Without it

What goes wrong between the player and the wall

An LED wall rarely has a TV’s 1920 × 1080 pixels. The sending card takes the player’s HDMI picture and passes one rectangle of it to the wall. Anything that scales or shifts the picture on the way shows on the LEDs.

  • Cut off

    The player fills the whole 1920 × 1080 picture, but the card only reads its top-left corner. Most of your design never reaches the wall.

  • Squashed or stretched

    The design is squeezed into the wall’s shape by the box, the card or a video processor. Logos go oval, text goes thin.

  • Soft and blurry

    A box that draws at 1280 × 720 and scales up, or a picture shrunk to fit an overscan border, puts edges between LEDs. They light half-way.

Scaled. Edges fall between LEDs, which light half-way.
Pixel-exact. Each pixel of the design lights one LED.
How it works

Four numbers, set twice

The card and Studio get the same size and position. That is all it takes.

  1. Count the wall’s pixels

    Cabinets across times pixels per cabinet. Six 500 mm cabinets at 3.9 mm pitch are 6 × 128 = 768 pixels wide. The LED wall calculator does it for you.

  2. Set the sending card’s area

    In the card’s own software, set where the wall’s picture starts in the HDMI input (often 0, 0) and its width and height.

  3. Set the same area in Studio

    Open the screen in Studio, then Screen size and position, Exact pixels. Type the same four numbers and save.

  4. Design at the wall’s size

    Studio makes the screen’s designs again at that size, and new designs for it start there. Every template fits the wall.

Screen size and position

How much of the screen your designs use.

1920 × 1080
768 × 384

The area fits inside the picture: the player draws your designs there, pixel for pixel.

A copy of Studio’s settings on this page: change the numbers to see your own wall. Nothing is saved.

Players

Which players draw pixel-exact

Exact pixels is a setting of our own easyCMS players. Studio shows it on the screen’s page when the screen can use it.

Player Runs on Exact pixels
easyCMS Web Player Chrome or Edge on a Windows PC, a Mac, Linux or ChromeOS Yes
easyCMS Android player Android boxes, sticks and TVs Coming with Android player 1.0.8. Studio will then also check that the box itself draws pixel for pixel.
easyCMS player for Mac A Mac mini or any Mac on macOS 13 or newer Yes, when it is released (coming soon)
Samsung Tizen and LG webOS Signage screens with the player built in No: designs fill the screen
Xibo’s own players Xibo for Windows and Xibo for Android No: designs fill the screen. Use the easyCMS Web Player or Android player instead.

Cheap Android boxes often draw at 1280 × 720 and scale it up, or shrink it inside an overscan border. From Android player 1.0.8, Studio will say when a box does, and on boxes that allow it, match the box’s Android size to its HDMI output for you.

Wall sizes

Typical walls and their pixels

A wall’s pixels are its cabinets times the pixels in each. Typical cabinets, not any one maker’s: check your cabinet’s data sheet, or work it out in the LED wall calculator.

Cabinet and pixel pitch Pixels per cabinet Cabinets The wall in pixels
Indoor 500 × 500 mm, 3.91 mm 128 × 128 6 × 3 (3 × 1.5 m) 768 × 384
Indoor 640 × 480 mm, 2.5 mm 256 × 192 4 × 2 (2.56 × 0.96 m) 1024 × 384
Rental 500 × 500 mm, 2.6 mm 192 × 192 5 × 3 (2.5 × 1.5 m) 960 × 576
Outdoor 960 × 960 mm, 6.67 mm 144 × 144 4 × 2 (3.84 × 1.92 m) 576 × 288
Outdoor 960 × 960 mm, 10 mm 96 × 96 8 × 4 (7.68 × 3.84 m) 768 × 384
Fine pitch 600 × 337.5 mm, 1.875 mm 320 × 180 6 × 6 (3.6 × 2.03 m) 1920 × 1080

The last wall is exactly 1920 × 1080: it fills the picture, so it needs no exact area at all.

Sending cards

Works with the card you have

  • Any card with an HDMI input

    Novastar, Colorlight, Linsn and other sending cards all read one rectangle of the picture they receive. easyCMS only needs to know which one.

  • The card’s software stays in charge

    Brightness, colour calibration and the receiving cards are set in the card’s own software, such as NovaLCT, LEDVISION or LEDStudio. easyCMS does not touch them.

  • Bigger than 1920 × 1080?

    The area has to fit inside the picture the player sends. For a larger wall, set the computer to a 4K output and use a card with a 4K input.

Not sure about your card or video processor? Book a demo and tell us its model: we will say how to set it up.

FAQ

Questions people ask

What happens outside the area?

It stays black. The sending card does not read it, so nothing outside it shows on the wall.

What if a design is not the wall’s size?

It is fitted inside the area, as on a normal screen, so it may have black bars. Studio avoids this: the screen’s designs are made again at the wall’s size.

Can I move or resize the area later?

Yes. Change the numbers in Studio and save. The screen follows at its next check-in, without a restart.

How big can the area be?

From 64 to 8192 pixels wide and high, anywhere in the player’s picture. It has to fit inside the picture the player sends, for example 1920 × 1080.

Does an LED wall need a special licence?

No. A wall driven by one player is one screen, so it needs one display licence, whatever its size. Exact pixels is part of every account.

Show your designs on the wall, pixel for pixel

One payment of 49€, your first display licence included. Nothing renews, and the guides and the assistant are free.